AHD Car Rear View Reverse Camera for NISSAN Juke QASHQAI/Geniss/Pathfinder/X-TRAIL Sunny Waterproof Backup Camera

NOTE:
(1)Please check if your Android monitor supports AHD720P before purchasing
(2)Our car camera only supports Android large screens. Please check carefully before purchasing
(3)Because there may be slight differences between carsproduced in different countries, please check the size beforebuying.
Feature:
1. Condition:six-layer lens,100%Â products and high quality

2. hard-resistant function, strong blowing

3. Easy installation and simple operation

4. High definition camera reading, high definition and wide viewing angles

5. Ensure safe driving to avoid accidents on vehicles

6.Stable performance, low power consumption, low noise, smart adjustment, night vision effect

Product List:
1 * Car rear camera
1 * 6m video cable
1 * 1m power cable
1 * User manual
Cameras with CVBS CCD video signal is universal for all monitors, but AHD signal will only work with AHD monitor!
Adjustment to AHD signal via monitor settings is required before mounting the camera:
Go to Car settings >> Factory settings >> Reverse (picture) settings >> Select AHD720P
SO, if the monitor does not support AHD signal, it can be switched to CVBS
Conversion Line Control
Note: Our cameras usually default to CVBS. After cutting the cable, they will switch to AHD. Before cutting the cable, please switch to AHD channel in the car display settings, otherwise there will be no signal or black screen.After setting it up, it canrun normally
Possible issues that may arise during the installation process
After installation, black screen, no signal, blurred screen, and black and white image appear
Resolvent:
1. Check if the camera cable is not properly connected
2. First, check if the Monitor is on the same channel as the camera, as our camera is Dual channel camera, so it is necessary to confirm whether the camera is a CVBS or AHD channel, usually The default is CVBS channel, and after cutting the green line, it becomes AHD channel. After confirming the camera channel, It is necessary to set up channels corresponding to the camera on the car Monitor, such as the camera For AHD channel, the monitor needs to be set to AHD 720P channel. If the camera If it is a CVBS channel, set the Monitor to CVBS/NTSC