IoTorero Made For ESPHome No Relay EU Plug Consumption Monitoring 16A Works With Home Assistant

Without Relay Made For ESPHome EU Plug Consumption Monitoring
Suitable for monitoring the energy consumption of devices that are continuously powered on

NO Calibration Needed
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
Specification
Input voltage：100-240VAC 50/60Hz
Current：16A(Max)
Power rating：3680W
Product Size：L51*W51*H85mm
Standard：EU
Wireless standard：IEEE802.11b/g/n,2.4GHz
Housing Color：Whtie
Operation Temperature：-20℃～+50℃
Plastic material:ABS+PC
Fire-protection rating:94-V0
Package Size：62*62*86mm
Weight：80g
Yaml File
//github.com/athom-tech/athom-configs/blob/main/athom-without-relay-plug.yaml
GPIO
GPIOs:

GPIO3： CSE7766 Rx
GPIO5： Button1
GPIO13 ：LedLinki
Note
HLW8032 occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.

To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.