Universal 4-Cylinder 3-Cylinder 2-Cylinder Carburetor Synchronizer for Motorcycle, Carb Balancer Synchronization Gauge

Price: [price_with_discount]
(as of [price_update_date] – Details)

[ad_1]

Product Description

Instrument use :

1. The calibration unit is cm Hg (range: 8-42 cm Hg).2. Ensure that the four cylinder balance instrument is vertical.3. The instrument does not need to be zeroed or calibrated. During assembly, all parts are matched.4. Dirt or oil stains enter the pressure gauge. The stainless steel column is difficult to move and can be cleaned.5. After use, first remove the black rubber hose from the four cylinder balance instrument, then remove it from the inlet, and hang the rubber hose to drain the fuel.

Principle :

Stainless steel column is used to replace highly toxic mercury in balance instrument. The stainless steel column will be sucked by the negative pressure of the engine and float in the transparent conduit to indicate the balance state.

More accurate than any dial or clock manometer we have tested.Better resolution than a typical dial indicator.Unlike a typical dial indicator, the four columns are adjacent for comparison and reading.

Adapter (Φ 4x5mm) x 4

Adapter (Φ 4x6mm) x 4

Black Rubber Hose (10cm) x 4

Clear Rubber Hose Restrictor (1.5mm) x 4

T-Type Adapter (Φ 4mm) x 4

Black Rubber Hose (90cm) x 4

Be Careful :

During use, if any fuel flows into the balance instrument, please keep it upside down in the high position and connect it to the running engine until all fuel is discharged from the scale pipe of the balance instrument.

1. please read the manual carefully before use. 2. keep the mouth away from the balance instrument. 3. when using, the pressure gauge must be vertical.

Packing

The 4 column XiTuanYuan will accurately balance 2, 3 and 4 cylinder carburetor and fuel injected throttle bodies.

Synchronizer x 1 Black Rubber Hose (90cm) x 4, Black Rubber Hose (10cm) x 4 Clear Rubber Hose Restrictor (1.5mm) x 4 T-Type Adapter (Φ 4mm) x 4 Adapter (Φ 4x5mm) x 4 , Adapter (Φ 4x6mm) x 4 Instructions x 1 Product packaging box x 1

【Packing】：carb synchronizer tool synchronizer x 1,Black Rubber Hose (90cm) x 4,Black Rubber Hose (10cm) x 4,Clear Rubber Hose Restrictor (1.5mm) x 4,T-Type Adapter (Φ 4mm) x 4,Adapter (Φ 4x5mm) x 4,Adapter (Φ 4x6mm) x 4,Instructions x 1,Product packaging box x 1.
【Accurate】：The 4 column XiTuanYuan will accurately balance 2, 3 and 4 cylinder carburetor and fuel injected throttle bodies.
【Principle】：Stainless steel column is used to replace highly toxic mercury in balance instrument. The stainless steel column will be sucked by the negative pressure of the engine and float in the transparent conduit to indicate the balance state.
【Operation】：Connect the negative pressure interface of the engine. If there is an idle speed sensor, use a T-adapter to connect it. Adjust under the idle speed range of the original guide rail to make the four columns basically parallel.
【Good Customer Service】 : We aim to provide good quality product and sincere service for our customers, If you have any questions about the product, please feel free to contact us We will solve it for you .

[ad_2]