XTOOL IP919PRO Car OBD2 Scanner All System Diagnostic Tool Active Test ECU Coding Programming Topology Mapping 42+ Resets FCA

XTOOL InPlus IP919PRO: A Versatile Must-Have Diagnostic Bi-Directional Scanner
Upgraded Version of XTOOL InPlus IP919 Scan Tool
XTOOL IP919PRO automotive diagnostic tool is packed with upgrades including Charger Base, Android 10.0 OS, 10.1′ display, 8GB+128GB memory and a robust 7.2V 6400mAh battery (equivalent to 3.7V 12800mAh), this device takes performance to the next level.
But wait, there’s importance! XTOOL has revamped the connection mode, switching from BT to Wi-Fi communication. This means an extended communication range, faster data loading—10X speedier than the traditional wireless BT Scanner!
Topology Mapping
XTOOL IP919PRO car scanner featuring topology mapping provides intuitive navigation and operation for comprehensive car diagnostics, catering to both professional mechanics and automotive enthusiasts alike. Perfect for home car owners seeking versatile diagnostic capabilities.
Bi-Directional Control
XTOOL IP919PRO diagnostic scanner fully control over all various vehicles components to perform active tests like EVAP test, idle relearn, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Windows Turn On/Off, Fuel Trim Reset, Fuel Composition Reset, etc.
All System Diagnostics
XTOOL IP919PRO has the abilities as OEM tools to perform all available systems diagnostic to view all the situation of each system to read/clear codes, live data PIDs graphing for all vehicle systems including Engine, Transmission, Chassis and Safety control system, Body control system, Communication and Entertainment system, etc.
ECU Online Programming
All-in-one solution for your ECU tuning needs, XTOOL IP919PRO car scanner allows you to program or flash ECU after replacing the modules. Note: Available for BMW / VW / AUDI / SKODA / Benz ONLY.
PMI Offline ECU Programming
Essential Advanced Functions for Ford /Lincoln /Mazda Owners, efficiently simplifies the programming process, quickly uploads the data from the old module to the new module to complete the ECU replacement.
for BMW Guided Function
XTOOL IP919PRO car diagnostic scanner provides diagnostic steps based on vehicle fault codes, including module testing, functional testing, wiring diagrams, component location maps, etc., facilitating troubleshooting and repair of vehicle faults. Compatible for BMW.
for VAG Guided Function
XTOOL InPlus IP919 Pro can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructionsfor VW, for Audi, for Skoda, etc.
ECU Coding & Customization
XTOOL IP919PRO allows you to code/match the New ECUs, and customize the vehicle as needed, optimize the specific performance to improve fuel efficiency, reduce power loss, improve the durability of mechanical parts, etc. Note: Available for BMW / VW / AUDI / SKODA / BENZ / Mitsubishi ONLY.
42+ Reset Services
The XTOOL IP919PRO car diagnostic scanner offers extensive reset functions including ABS Bleeding, Injector Coding, Gear Relearn, SAS Reset, TPMS Reset, BMS Reset, Oil Reset, Brake Reset, AFS Reset, and more.
Auto VIN Scan & CAN Fast Scan
With AutoVIN technology, you can identify your vehicle’s make, model, and year information with just one click. The convenient AutoScan and CAN Fast Scan feature automatically scans all of the vehicle’s ECU and detects any fault codes.
Pre Scan & Post Scan & Diagnostic Report V2.0
Pre & Post Scan reports can clearly recording the vehicle’s diagnostic status before and after repairs helps mechanics understand the issues and create suitable repair plans, while also keeping customers informed about the services and costs. V2.0 diagnostic report allow customization now, add your repair shop logo to the report to impress the customer.
FCA AutoAuth
The FCA AutoAuth feature enhances diagnostics for FCA vehicles (for Chrysler, for Jeep, for Dodge 2018 and later) without gateway restrictions. Note: 1)FCA support is currently available only in North America; for other regions, consider purchasing the XTOOL 12+8 Cable Adapter. 2)The buyer is required to register an FCA account, any charges have nothing to do with the seller.
CAN FD & DoIP Protocol
Built in CAN FD protocol and DoIP protocol, XTOOL InPlus IP919PRO diagnostic scanner covers for GM MY2020+ models and for BMW E/F/G Chassis for Jaguar for Land Rover newer vehicles.
Note: Functions vary by the car brands. Please check the compatibility before purchase.
Topology Mapping
XTOOL InPlus IP919PRO car scanner introduces the innovation of Module Topology Mapping. It illuminates the interplay between diverse vehicle modules and swiftly pinpoints faulty ones in a single glance. This feature slashes guesswork, enhances diagnostic efficiency by a remarkable 60%, and caters to the needs of automotive mechanics, car dealers, and seasoned DIY enthusiasts.
OE-Level All System Diagnostics
XTOOL IP919PRO car diagnostic tool performs OE-Level diagnosis on all available systems like ABS, SRS, TPMS, Engine, Transmission, Brake System and etc, with complete capabilities for reading codes, clearing codes, reading live data, retreive freeze frame, active test, reading ECU information, which makes It an ideal choice for DIY auto Mechanic and repair shop.
4000+ Active Test Bidirectional Control
XTOOL InPlus IP919PRO bidirectional scanner supports active test to output the command into the ECU to request information or command a module to perform specific tests and functions. To find faults in the subsystems of your car effortlessly, without using the vehicle’s control.
Most-Used Active Tests:
EVAP Test
Injector Buzz Test
Window/Mirror/Door Lock Test
A/C Clutch On/Off
ABS Pump Cycling
Pump and Value Tests
Interior & exterior lights Test
Sound horn Test
42+ Service Functions
Oil Reset: Reset service intervals after oil change and turn off the oil light.
EPB Reset: Reset brake pads after replacement of brake system.
SAS Adjustment: Perform calibration of the steering angle sensor.
BMS Reset: Register the new battery to the ECU after replacement.
Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.
ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.
Injector Coding: Coding injectors after replacement.
Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.
Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.
Full Special functions for specific car brands: Steering position sensor calibration, Zero Point Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Injector balance test, ECU Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Language change, A/F Settings, Stop/Start Reset, etc.
Note: All the service functions available vary acorss vehicles. Please come to us to check compatibility with car VINs.
ECU Online Programming
Replace the existing software, firmware in the ECU
Program/reflash new modules after ECU replacement
Fix software-controlled driving performance and emission issues
Note: Compatible for BMW, for Benz, for VW car
PMI Programmable Module Installation Function
XTOOL IP919PRO diagnostic scanner support PMI function, Compatible for Ford /Lincoln/ Mazda and etc. This function allows you to copy data from the original module and install it in the new unit to finish module replacement.
Advanced ECU Coding
Online Coding: XTOOL InPlus IP919PRO diagnostic scanner can directly access to online vehicle repair data to do high-level repairs. Compatible for BMW ONLY.
Offline Coding: Read the code from the original module, and then write the code for the new module. Compatible for VW /Audi /Skoda /Benz /Mitsubishi, etc.
Note: Coding functions vary by model. Check the compatibility by sending VIN to us.
ECU Configuration
XTOOL InPlus IP919PRO help refresh hidden functions to reprogram adaptive data for certain components after making repairs or replacements. You can activate the higher-level car functions and disable any annoying features. Modify personalization/customize some extra options such as disabled the seat belt buzzer, wind the windows down with the remote fob, etc.
for VAG Guided Function
With VAG Guide Functions, XTOOL InPlus IP919PRO can perform complex functions such as special functions to help your diagnostic step by step with instructions for VW, for Audi, for Skoda, etc.
for BMW Guided Function
Repair assistance function for BMW. This functionality provides diagnostic steps based on vehicle fault codes, including module testing, functional testing, wiring diagrams, component location maps, etc., facilitating troubleshooting and repair of vehicle faults.
Live Data Visualization & Export Functionality
XTOOL InPlus IP919PRO diagnostic scanner displays a multi-PID live data stream in dynamic graphics, showing up to 8 PIDs on one screen! This allows you to effortlessly analyze the correlations between different sensors, actuators, and calculated values at a single glance. Every detail, is presented.
XTOOL IP919PRO OBD2 scanner also supports exporting live data stream as CSV file, which can save for a long time and share to pc, it also can share diagnostic record to PC directly, help you further check potential problems of the vehicle.
Pre & Post Scan & Diagnostic Report V2.0
XTOOL IP919PRO diagnostic scanner newly addes pre-scan and post-scan to integrate massive repair information to help users obtain valuable diagnostic information and lower the repair difficulty, shows whether the problem have been fixed, etc.
XTOOL InPlus IP919PRO bi-directional scanner has upgraded its diagnostic report to version 2.0, featuring an intuitive icon display for critical systems, ensuring you never miss essential information. Diagnostic report V2.0 also allows you to customize your shop’s logo, add notes, or upload images, making your business more professional and easier to manage.
AutoAuth for FCA
XTOOL InPlus IP919PRO all system diagnostic scanner use the latest software update function AutoAuth to provide systems diagnosis, active test, retrieve module info, ecu coding, etc., making the diagnostics more secure.
Note: Applicable to FCA vehicles (for Chrysler, for Dodge, for Jeep, for Fiat) equipped with a security gateway module (SGW) in 2017 and later…
Broad Vehicle Coverage
XTOOL InPlus IP919PRO car OBD2 scanner can work on 85+ car brands, 140+ models and 10,000 cars globally 12V vehicles after 1996 with OBDII including sedans, light duty trucks, SUVs, Mini Vans.
Support CAN FD/DoIP Protocol: access new communication protocols of CANFD (cover for GM MY2020+ models) without extra adapter, and wireless communication of DoIP (cover for BMW E/F/G Chassis, for Land Rover, for Jaguar).
Support 15+ Languages
XTOOL InPlus IP919PRO covers 15+ languages for better term understanding: English, German, Spanish, French, Polish, Portuguese, Russian, Italian, Turkish, Japanese, Korean, Vietnamese, Arabic, Finnish, Traditional Chinese…
Note: The default language is English. To enable another language option with the serial number of your IP900 and the required language to us.
3 Years Free Updates
We provides 3 Years free update with high update frequency, new features/cars released monthly, one-Touch update via WiFi to enjoy more functions, get wider available vehicle coverage, add more languages, and improve the performance. Competitors have no software maintenance for a long time, vehicles model/ functions update less support less.
Note: You can work with IP919 Pro scan tool normally after it expires.
Enjoy XTOOL IP919PRO car scan tool with a ✔️ 3-year warranty, ✔️ hassle-free returns within 30 days, ✔️ lifetime free tech support! Contact us for prompt and reliable assistance with any tool-related issues.
Equipped with Charger Base
XTOOL InPlus IP919 Pro car diagnostic scanner adopts new independent charging base design, which breathing display when charging.
blue light means power connection
red light means in charging
green light means full charged
Next-Level Hardware Configuration
6400mAh 7.2V battery for fast charging
8GB RAM+128GB ROM
10.1 inch LCD touch screen with 1920*1200px HD resolution
Qualcomm octa-core processor
Android 10 OS
2.4G independent WiFi communication channel
What is in the XTOOL InPlus IP919PRO Package?
IP919 Pro Tablet *1
Charger Base *1
Plastic Tool Case *1
Type-C to Type-C Charger Cable *1
Type-C to Type-B Charger Cable *1
Type-C to Type-A Connector (Connect to PC) *1
Charger Adapter US *1
Charger Adapter UK *1
Charger Adapter EU *1
DB15M Main Cable *1
Connector:
OBDII-16 Connector *1
For HONDA-3
For HYUNDAI/KIA-10
For KIA-20
For BMW-20
For TOYOTA-17
For MAZDA-17R
For NISSAN-14
For GM/DAEWOO-12
For SUZUKI-3
For FIAT-3
For MITSUBISHI-12+16
For BENZ-38
For AUDI-4
For UNIVERSAL-3